How tests Work


Do you have a concern regarding drug and alcohol use or abuse?

Click To Buy Any Drug & Alcohol Tests Online


Imagine having the peace of mind that comes with knowing your drug & alcohol test results instantly, in the privacy of your home or work environment. Being able to take appropriate action based on those drug & alcohol test results. And knowing your privacy has been protected.

Drug & Alcohol Test Kits

“Your product is a Godsend.”Daniel J., Kalamazoo, MI

How Our FDA Cleared Urine Drug Testing Kits | Saliva Drug and Alcohol Testing Kits for Forensic use Home Drug & Alcohol Tests Work


Our Home Drug & Alcohol Testing Kits are easy to use, private, accurate and takes from 3 to 5 minutes for results.

The drugs tested for are methamphetamine (speed, ecstasy), cocaine, opiates (morphine and heroin), THC (marijuana) and PCP. These are found to be the most common street drugs available at this time.

Studies have been completed on our Home Drug & Alcohol Testing Kits guaranteeing a 99.9% rate of accuracy via independent laboratory testing.

The ease of using our home drug & alcohol test kits is evident from the illustrations below. Reading the results is very simple. Obtaining the products is just a click away. Disposal after use is just a matter of dropping it in a waste container.

With all that in mind, the decision is as easy as 1, 2, 3. Click on the order page, fill out the order form, send it and then WHA-LA – it arrives, ready for you to use. Perform the test, see the results, then take appropriate action.

MAY YOUR LIFE BE FILLED WITH WONDERMENT
AND JOY FOR MANY YEARS TO COME
Saliva – Alcohol & Drug Screen Procedures

12 Substance Test Cup
EZ Split Key
INTEGRATED E-Z SPLIT KEY’CUP ll Procedure Card
12 Substance Test Cup



Urine – Drug Screen Procedures


RESULT INTERPRETATION

Positive: A colored line appears in the control region ( C ). NO line appears in the test region next to the name of a specific drug tested. The positive result means that the drug concentration in the urine sample is greater than the designated cut-off for a specific drug.

Negative: * A colored line appears in the control region ( C ) and a colored line appears in the test region ( T ). Up to four colored lines may appear in each result window. One line will be in the control region ( C ). Up to three lines will be next to the drug names in the test region. This negative result means that the drug concentration in the urine sample is below the designated cut-off for a specific drug.

Invalid: No Line appears in the control region ( C ). If this occurs read the directions again and repeat the test with a new device. If the result is still invalid stop using the test devices and contact our company at 1-719-594-0854

*Note: The shade of color in the test region ( T ) may vary. The result should be considered negative whenever there is even a faint colored line.

 


HOW TO PERFORM THE TEN SUBSTANCE TEST WITH DROPPER

10 Panel Drug Test Kit

  1. Remove the test device from sealed pouch. Use promptly.
  2. Place the test device on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine into each sample well of the test device.
  3. Wait for approximately 3 to 5 minutes for the colored lines to appear in the result windows. Record results immediately after testing as needed.

HOW TO PERFORM THE TEN SUBSTANCE TEST

Ten Substance Drug Test Procedure

 

 


HOW TO PERFORM THE SIX SUBSTANCE TEST

6 panel drug test

HOW TO PERFORM THE FIVE SUBSTANCE TEST

Five Substance Drug Test Procedure


HOW TO PERFORM THE THREE SUBSTANCE TEST

Three Substance Drug Test Procedure


HOW TO PERFORM THE TWO SUBSTANCE TEST

Two Substance Drug Test Procedure


HOW TO PERFORM THE ONE SUBSTANCE TEST

One Substance Drug Test Procedure



***Do not open pouches until ready to perform the test***

  1. Remove the test device from its protective pouch (bring the device and test sample to room temperature prior to testing)
  2. Label the device with patient identification, operator and date, if needed. Remove the cap to expose the sample strips.
  3. Immerse the sample strips in the urine sample (as shown in the diagram above) until you observe a pink color migrating across the result windows (approximately 30 seconds). Do not allow the urine sample to touch the plastic device.
  4. Remove device from the sample cup and replace cap. Place the device on a flat surface.
  5. Read Results within 3 to 8 minutes. Do not read after 8 minutes. Record results immediately after testing.
Test Results Chart



Click To Buy Any of Our Home Drug & Alcohol Tests

HOW TO PERFORM THE SINGLE SUBSTANCE TEST


Single Substance Drug Test Procedure

***Do not open pouches until ready to perform the test***

  1. Remove the test device from its protective pouch (bring the device and test sample to room temperature prior to testing)
  2. Open the sealed pouch for the test being conducted. (M-AMP, THC, PCP, OPI, or COC)
  3. Remove the cassette and pipette. Place the cassette on a flat surface. Then take the pipette and squeeze the bubble end. Then immerse the pointed, open end into the urine sample. Release the pressure on the bubble and the pipette will fill with urine.
  4. Put 4-6 drops into the well (S) as shown in the diagram above.
  5. Wait for the lines to appear. Two lines indicate a negative result, and one line is a positive result, as seen in the diagram above.
  6. A pink/rose colored band will form in the Control Zone if the test is working properly. Another pink/rose band will form in the Test Zone if the test is negative. If the test is positive, no band will appear in the Test Zone.
  7. Read Results within 3 to 8 minutes. Do not read after 8 minutes. Record results immediately after testing.


HOW TO PERFORM THE COTININE SMOKE CHECK TEST


  1. Remove the test device from its protective pouch. Make sure the urine specimen and test device are at room temperature. Place the device on a flat surface.

  2. Take the pipette and squeeze the bubble end. Then immerse the pointed, open end of the pipette into the urine sample. Draw the urine sample to the line marked on the pipette (approximately 0.2 ml). Dispense the entire contents into the sample well. Use a separate pipette and device for each sample tested.

  3. Wait for lines to appear. Read the results in three minutes. DO NOT read the results after eight minutes. See the diagram above for reading results.



HOW TO INTERPRET RESULTS

This assay provides only a preliminary analytical test result. A more specific alternative chemical method must be used in order to obtain a confirmed analytical result. Gas Chromatograpraphy/mass spectrometry (GC/MS) has been established as the preferred confirmatory method by the National Institute on Drug Abuse (NIDA). Clinical consideration and professional judgment should be applied to any drug abuse test result, particularly when preliminary positive results are indicated.

These test kits can detect the following
drugs at the levels listed below:

PCP25 ng/ml or above
COC300 ng/ml or above
AMP1000 ng/ml or above
M-AMP1000 ng/ml or above
OPI2000 ng/ml or above
THC50 ng/ml or above
NICOTINE6250 ng/ml or above
COTININE200 ng/ml or above
MTD300 ng/ml or above
BAR300 ng/ml or above
BZO300 ng/ml or above
TCA1000 ng/ml or above

  • Negative: Two colored lines appear adjacent to each other in the result window. This indicates that no drug above the cut-off level has been detected. The test line intensity may be any shade of pink and weaker or stronger than that of the control line. All five tests are independent of each other, it is not recommended to compare the results or color intensity of the test lines.
  • Positive: Only one colored line appears in the control region (C). No test line appears in the test region (T). A positive result should not be considered conclusive and should be confirmed with a more specific alternative to chemical method such as GC/MS.
  • Invalid: If no control line appears in the result window, the test should be considered void. Improper testing procedures, sample tampering or deterioration of reagents probably occurred.

***One line on a CLEAR WHITE background is a positive.***
Two lines, INCLUDING A VERY FAINT SECOND LINE,
is a negative.


Click To Buy Any of Our home drug & alcohol test kits

Top

he control region ( C ). NO line appears in the test region next to the name of a specific drug tested. The positive result means that the drug concentration in the urine sample is greater than the designated cut-off for a specific drug.

Negative: * A colored line appears in the control region ( C ) and a colored line appears in the test region ( T ). Up to four colored lines may appear in each result window. One line will be in the control region ( C ). Up to three lines will be next to the drug names in the test region. This negative result means that the drug concentration in the urine sample is below the designated cut-off for a specific drug.

Invalid: No Line appears in the control region ( C ). If this occurs read the directions again and repeat the test with a new device. If the result is still invalid stop using the test devices and contact our company at 1-719-594-0854

*Note: The shade of color in the test region ( T ) may vary. The result should be considered negative whenever there is even a faint colored line.

 


HOW TO PERFORM THE TEN SUBSTANCE TEST WITH DROPPER

10 Panel Drug Test Kit

  1. Remove the test device from sealed pouch. Use promptly.
  2. Place the test device on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine into each sample well of the test device.
  3. Wait for approximately 3 to 5 minutes for the colored lines to appear in the result windows. Record results immediately after testing as needed.

HOW TO PERFORM THE TEN SUBSTANCE TEST

Ten Substance Drug Test Procedure

 

 


HOW TO PERFORM THE SIX SUBSTANCE TEST

6 panel drug test

HOW TO PERFORM THE FIVE SUBSTANCE TEST

Five Substance Drug Test Procedure


HOW TO PERFORM THE THREE SUBSTANCE TEST

Three Substance Drug Test Procedure


HOW TO PERFORM THE TWO SUBSTANCE TEST

Two Substance Drug Test Procedure


HOW TO PERFORM THE ONE SUBSTANCE TEST

One Substance Drug Test Procedure



***Do not open pouches until ready to perform the test***

  1. Remove the test device from its protective pouch (bring the device and test sample to room temperature prior to testing)
  2. Label the device with patient identification, operator and date, if needed. Remove the cap to expose the sample strips.
  3. Immerse the sample strips in the urine sample (as shown in the diagram above) until you observe a pink color migrating across the result windows (approximately 30 seconds). Do not allow the urine sample to touch the plastic device.
  4. Remove device from the sample cup and replace cap. Place the device on a flat surface.
  5. Read Results within 3 to 8 minutes. Do not read after 8 minutes. Record results immediately after testing.
Test Results Chart



Click To Buy Any of Our Home Drug & Alcohol Tests

HOW TO PERFORM THE SINGLE SUBSTANCE TEST


Single Substance Drug Test Procedure

***Do not open pouches until ready to perform the test***

  1. Remove the test device from its protective pouch (bring the device and test sample to room temperature prior to testing)
  2. Open the sealed pouch for the test being conducted. (M-AMP, THC, PCP, OPI, or COC)
  3. Remove the cassette and pipette. Place the cassette on a flat surface. Then take the pipette and squeeze the bubble end. Then immerse the pointed, open end into the urine sample. Release the pressure on the bubble and the pipette will fill with urine.
  4. Put 4-6 drops into the well (S) as shown in the diagram above.
  5. Wait for the lines to appear. Two lines indicate a negative result, and one line is a positive result, as seen in the diagram above.
  6. A pink/rose colored band will form in the Control Zone if the test is working properly. Another pink/rose band will form in the Test Zone if the test is negative. If the test is positive, no band will appear in the Test Zone.
  7. Read Results within 3 to 8 minutes. Do not read after 8 minutes. Record results immediately after testing.


HOW TO PERFORM THE COTININE SMOKE CHECK TEST


  1. Remove the test device from its protective pouch. Make sure the urine specimen and test device are at room temperature. Place the device on a flat surface.

  2. Take the pipette and squeeze the bubble end. Then immerse the pointed, open end of the pipette into the urine sample. Draw the urine sample to the line marked on the pipette (approximately 0.2 ml). Dispense the entire contents into the sample well. Use a separate pipette and device for each sample tested.

  3. Wait for lines to appear. Read the results in three minutes. DO NOT read the results after eight minutes. See the diagram above for reading results.



HOW TO INTERPRET RESULTS

This assay provides only a preliminary analytical test result. A more specific alternative chemical method must be used in order to obtain a confirmed analytical result. Gas Chromatograpraphy/mass spectrometry (GC/MS) has been established as the preferred confirmatory method by the National Institute on Drug Abuse (NIDA). Clinical consideration and professional judgment should be applied to any drug abuse test result, particularly when preliminary positive results are indicated.

These test kits can detect the following
drugs at the levels listed below:

PCP25 ng/ml or above
COC300 ng/ml or above
AMP1000 ng/ml or above
M-AMP1000 ng/ml or above
OPI2000 ng/ml or above
THC50 ng/ml or above
NICOTINE6250 ng/ml or above
COTININE200 ng/ml or above
MTD300 ng/ml or above
BAR300 ng/ml or above
BZO300 ng/ml or above
TCA1000 ng/ml or above

  • Negative: Two colored lines appear adjacent to each other in the result window. This indicates that no drug above the cut-off level has been detected. The test line intensity may be any shade of pink and weaker or stronger than that of the control line. All five tests are independent of each other, it is not recommended to compare the results or color intensity of the test lines.
  • Positive: Only one colored line appears in the control region (C). No test line appears in the test region (T). A positive result should not be considered conclusive and should be confirmed with a more specific alternative to chemical method such as GC/MS.
  • Invalid: If no control line appears in the result window, the test should be considered void. Improper testing procedures, sample tampering or deterioration of reagents probably occurred.

***One line on a CLEAR WHITE background is a positive.***
Two lines, INCLUDING A VERY FAINT SECOND LINE,
is a negative.


Click To Buy Any of Our home drug & alcohol test kits

Top

#COC”>COC300 ng/ml or aboveAMP1000 ng/ml or aboveM-AMP1000 ng/ml or aboveOPI2000 ng/ml or aboveTHC50 ng/ml or above NICOTINE6250 ng/ml or aboveCOTININE200 ng/ml or aboveMTD300 ng/ml or aboveBAR300 ng/ml or aboveBZO300 ng/ml or aboveTCA1000 ng/ml or above

  • Negative: Two colored lines appear adjacent to each other in the result window. This indicates that no drug above the cut-off level has been detected. The test line intensity may be any shade of pink and weaker or stronger than that of the control line. All five tests are independent of each other, it is not recommended to compare the results or color intensity of the test lines.
  • Positive: Only one colored line appears in the control region (C). No test line appears in the test region (T). A positive result should not be considered conclusive and should be confirmed with a more specific alternative to chemical method such as GC/MS.
  • Invalid: If no control line appears in the result window, the test should be considered void. Improper testing procedures, sample tampering or deterioration of reagents probably occurred.

***One line on a CLEAR WHITE background is a positive.***
Two lines, INCLUDING A VERY FAINT SECOND LINE,
is a negative.


Click To Buy Any of Our home drug & alcohol test kits

Top

"God Bless you all for helping us to protect our
loved ones. Thanks!" –Mary Jane B., Elkton, MD


 
Merchant Services

ABOUT SSL CERTIFICATES